IR2233JTRPBF ,3 Phase Driverapplications. The floating channels can be used to drive N-channel power MOSFETs orIGBTs in the hig ..
IR2233S ,3 Phase Driver, Separate High and Low Side Inputs, Overcurrent Comparator, Latching Fault Logic, Fault Clear Input, Synchronized Shutdown Input, 200ns Deadtime in a 28-lead SOIC packageFeaturesProduct Summary• • • • • Floating channel designed for bootstrap operation Fully ope ..
IR2235 ,3 Phase Driver, Separate High and Low Side Inputs, Overcurrent Comparator, Latching Fault Logic, Fault Clear Input, Synchronized Shutdown Input, 200ns Deadtime in a 28-pin DIP packageapplications. Propri-28-Lead SOICetary HVIC technology enables ruggedized monolithic construction.2 ..
IR2235J ,3 Phase Driver, Separate High and Low Side Inputs, Overcurrent Comparator, Latching Fault Logic, Fault Clear Input, Synchronized Shutdown Input, 200ns Deadtime in a mod. 44-lead PLCC packageElectrical CharacteristicsoV (V , V ) = 15V, V = V T = 25 C and C = 1000 pF unless otherwise specif ..
IR2235S ,3 Phase Driver, Separate High and Low Side Inputs, Overcurrent Comparator, Latching Fault Logic, Fault Clear Input, Synchronized Shutdown Input, 200ns Deadtime in a 28-lead SOIC packageElectrical CharacteristicsoV (V , V ) = 15V, V = V T = 25 C and C = 1000 pF unless otherwise specif ..
IR2238QPBF ,High Voltage, 3-Phase Driver IGBT Driver best suited for AC motor drive applicationsapplications. Integrated Soft shutdown duration time (typ.) 6.0μsecdesaturation logic provides ..
IS22C012-P , VERSATILE 10 SEC INSTANT VOICE ROM
IS22C012-P , VERSATILE 10 SEC INSTANT VOICE ROM
IS22C012-P- , VERSATILE 10 SEC INSTANT VOICE ROM
IS22C012-P. , VERSATILE 10 SEC INSTANT VOICE ROM
IS23SC1604 , 16-KBIT SECURED SERIAL EEPROM
IS23SC4442 , 256 BYTE EEPROM WITH WRITE PROTECT FUNCTION AND PROGRAMMABLE SECURITY
IR2233JTRPBF
3 Phase Driver
International
TGiR Rectifier
Data Sheet No. PD60107 revX
IR2133/IR2135(J&S)&(PbF)
|R2233/IR2235(J&S)&(PbF)
Features
q Floating channel designed for bootstrap operation
Fully operational to +6OOV or+1200V
Tolerant to negative transient voltage
dV/dt immune
q Gate drive supply range from 10V/12V to 20V DC and
up to 25V for transient
o Undervoltage lockout for all channels
q Over-current shut down turns off all six drivers
. Independent 3 half-bridge drivers
. Matched propagation delay for all channels
q 2.5V logic compatible
q Outputs out of phase with inputs
q All parts are also available LEAD-FREE
Description
The |R2133IR2135/IR2233IR2355 (J&S) are high voltage, high speed
power MOSFET and IGBT driver with three independent high side and
low side referenced output channels for 3-phase applications. Propri-
etary HVIC technology enables ruggedized monolithic construction.
Logic inputs are compatible with CMOS or LSTTL outputs, down to
2.5V logic. An independent operational amplifier provides an analog
feedback of bridge current via an external current sense resistor. A
current trip function which terminates all six outputs can also be de-
3-PHASE BRIDGE DRIVER
Product Summary
VOFFSET 600V or 1200V max.
krH- 200 mA/ 420 mA
VOUT 10 - 20V or 12 - 20V
ton/off (typ.) 7501700 ns
Deadtime (typ.) 250 ns
Packages
28-Lead PDIP
44-Lead PLCC Mo 12 leads
rived from this resistor. A shutdown function is available to terminate all six outputs. An open drain FAULT signal is provided to
indicate that an over-current or undervoltage shutdown has occurred. Fault conditions are cleared with the FLT-CLR lead. The
output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are
matched to simplify use in high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or
IGBTs in the high side configuration which operates up to 600 volts or 1200 volts.
Typical Connection
HlN1.2.3
HINI 22
FAt-JLT F/it-jLT
FLT-CLR FLT-CLR
CAO CAO
Please refer to our Application Notes and DesignTips for proper circuit board layout.
(Refer to Lead Assignments for correct pin confguration). This/These diagram(s) show electrical connections only.
up to 1200V
---o LOAD
IR2133/lR2135/lR22330R2235(JaS)&(PbF) International
TOR Rectifier
Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All volt-
age parameters are absolute voltages referenced to COM. The Thermal Resistance and Power Dissipation
ratings are measured under board mounted and still air conditions.
Symbol Definition Min. Max. Units
V3123 High side floating supply voltage (IR2133/lR2135) -0.3 625
(IR2233/IR2235) -O.3 1225
V3123 High side floating supply offset voltage V3123 - 25 V3123 + 0.3
VHo1,2,3 High side floating output voltage V3123 - 0.3 VB1,2,3 + 0.3
Vcc Fixed supply voltage -0.3 25
Vss Logic ground Vcc - 25 Vcc + 0.3
VLo1,2,3 Low side output voltage -0.3 Vcc + 0.3 V
VIN Logic input voltage (IN, LCN, ITRIP, SD & FLT-CLR) Vss - 0.3 (Vss + 15) or
(Vcc + 0.3)
whichever is
VIN,AMP Op amp input voltage (CA+ & CA-) Vss - 0.3 Vcc + 0.3
VOUMMP Op amp output voltage (CAO) Vss - 0.3 Vcc + 0.3
VFLT FAULT output voltage Vss - 0.3 Vcc + 0.3
dl/s/dt Allowable offset supply voltage transient - 50 V/ns
PD Package power dissipation @ TA s 25°C (28 Lead PDIP) - 1.5
(28 Lead SOIC) - 1.6 W
(44 lead PLCC) - 2.0
mm; Thermal resistance, junction to ambient (28 Lead PDIP) - 83
(28 Lead SOIC) - 78 °C/W
(44 lead PLCC) - 63
T, Junction temperature - 125
Ts Storage temperatu re -55 150 "C
TL Lead temperature (soldering, 10 seconds - 300
Recommended Operating Conditions
The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the
recommended conditions. All voltage parameters are absolute voltages referenced to COM. The vs offset rating is
tested with all supplies biased at 15V differential.
Symbol Parameter Definition Min. Max. Units
Vs1,2,3 High side floating supply voltage V3123 + 10/12 V3123 + 20
V3113 High side floating supply offset voltage (IR2133/lR2135) Note 1 600
(IR2233/IR2235) Note 1 1200
VHo1,2,3 High side floating output voltage V5123 V3123
Vcc Fixed supply voltage 10 or 12 20
Vss Low side driver return -5 5 V
VLo1,2,3 Low side output voltage 0 Vcc
VIN Logic input voltage (W, m, TRIP, SD & W) Vss Vss + 5
VINAMP Op amp input voltage (CA+ & CA-) Vss Vss + 5
vour,AMP Op amp output voltage (CAO) Vss Vss + 5
VFLT FAt-.)LT output voltage Vss Vcc
Note I: Logic operational for vs of COM - 5V to COM + 600W1200V. Logic state held for vs of COM AN to COM -VBs. (Please refer to the Design Tip
DT97-3 for more details).
Note 2: All input pins, op amp input and output pins are internally clamped with a 5.2V zener diode.
2
