IC Phoenix
 
Home ›  FF25 > FZL4146G-FZL4146G ..,Function and Industrial ICs
FZL4146G-FZL4146G .. Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
FZL4146GSIEN/a100avaiFunction and Industrial ICs
FZL4146GSIMENSN/a875avaiFunction and Industrial ICs
FZL4146GINFINEONN/a440avaiFunction and Industrial ICs
FZL4146GLNFINEONN/a197avaiFunction and Industrial ICs
FZL4146G .. |FZL4146GInfineonN/a468avaiFunction and Industrial ICs


FZL4146G ,Function and Industrial ICsFZL 4146Quad Driver Incl. Short-Circuit SignalingBipolar IC
FZL4146G ,Function and Industrial ICsFeatures● Short-circuit signaling● Four driver circuits for driving power transistors● Turn-ON thre ..
FZL4146G ,Function and Industrial ICsFeatures● Short-circuit signaling● Four driver circuits for driving power transistors● Turn-ON thre ..
FZL4146G ,Function and Industrial ICsFZL 4146Quad Driver Incl. Short-Circuit SignalingBipolar IC
FZL4146G .. ,Function and Industrial ICsFeatures● Short-circuit signaling● Four driver circuits for driving power transistors● Turn-ON thre ..
FZT1053A , SOT223 NPN SILICON PLANAR MEDIUM POWER HIGH GAIN TRANSISTOR
GM1HY55200A , HIGH-LUMINOSITY LED LAMP
GM1JE35200AE , HIGH-LUMINOSITY LED LAMP
GM1JE55200AE , HIGH-LUMINOSITY LED LAMP
GM1JR35200AE , HIGH-LUMINOSITY LED LAMP
GM1ZV80300AE , HIGH-LUMINOSITY LED LAMP
GM2126 , ANALOG INTERFACE ONPANEL SXGA LCD CONTROLLER WITH RSDS TRANSMITTER


FZL4146G-FZL4146G ..
Function and Industrial ICs
SHIEMIENS
Quad Driver Incl. Short-Circuit Signaling FZL 4146
Bipolar IC
Features
0 Short-circuit signaling
0 Four driver circuits for driving power transistors
o Turn-ON threshold setting from 1.5 to 7 V
P-DSO-20-7
Type Ordering Code Package
FZL 4146 G Q67000-H8743 P-DSO-20-7 (SMD)
General Description
The IC comprises four driver circuits capable of driving power transistors (PNP or
PMOS). The output transistors are protected against short-circuit to ground and supply
voltage. The turn-ON threshold can be set from 1.5 V to 7 V. Overload at one or several
outputs will be indicated at pin SQ (signaling output). The corresponding power
transistors are then protected by changeover to clock-governed operation.
Circuit Description
Each driver circuit has one active high driver input DI and a common enable input ENA
(active high) is provided for all stages. The Q output is designed to drive the output
transistors. The load current is sampled and, if necessary, limited via pin W. If the load
current exceeds the preset value, the output stage switches off. Switching-ON again is
provided by the built-in clock generator T. Its operation requires an external capacitor Ce
at pin CE. If Cl, is bridged by a break-key, switching-ON can only be carried out by
operating this key. The duty cycle of the clock generator is 1:47 (e.g. 45 us/2.1 ms with
C, = 10 nF). The clock generator is privileged versus the current sensor shut down.
When the supply is connected, the internal RS-FF goes into the state corresponding to
the released output.
Semiconductor Group 1 03.96
SIEMENS FZL 4146
The turn-ON threshold at input DI and ENA can be set via pin TS from 1.5 to 7 V.
' = O V... 1.5 V Turn-ON threshold = 1.5 V
VTS = 1.5 V... 7 V Turn-ON threshold = VTS
' = VS Turn-ON threshold = 7 V
Inputs DI, ENA and W are proof against line break, i.e. an open input at DI or ENA
corresponds to input L, open input W corresponds to overcurrent. If input TS is open, the
highest turn-ON threshold is provided.
The internal current supply B and the undervoltage monitor UV ensure that in case of a
supply voltage that is below the k, turn-OFF threshold, outputs Q and SQ are disabled
and the inputs go high-impedance. Basic functioning is possible within the range from VS
turn-OFF threshold to 4.5 V.
In case of overcurrent or short-circuit to ground at any output stage the signaling output
(SQ) will go low. In clock-governed operation (i.e. when there is automatic switching-ON
by the clock and not by a key), SQ goes high and low at the clock rate as long as a short-
circuit or overload is present. SQ is an open-collector output.
Any input and output is ESD proof within the limit values.
Semiconductor Group 2
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED