IC Phoenix
 
Home ›  DD24 > DS1337,Serial real-time clock
DS1337 Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
DS1337MAXIMN/a186avaiSerial real-time clock
DS1337DALLASN/a50avaiSerial real-time clock
DS1337N/a11avaiSerial real-time clock
DS1337DALLAS ?N/a50avaiSerial real-time clock
DS1337DSN/a82avaiSerial real-time clock


DS1337 ,Serial real-time clock DS1337 Serial Real-Time Clock
DS1337 ,Serial real-time clockELECTRICAL CHARACTERISTICS (V = 1.3V to 1.8V, T = -40°C to +85°C.) CC APARAMETER SYMBOL CONDITIONS ..
DS1337 ,Serial real-time clockFEATURES The DS1337 serial real-time clock is a low-power  Real-Time Clock (RTC) Counts Seconds, ..
DS1337 ,Serial real-time clockAPPLICATIONS PART TEMP RANGE PIN-PACKAGE MARK Handhelds (GPS, POS Terminal, MP3 Player) DS1337 -40° ..
DS1337 ,Serial real-time clockELECTRICAL CHARACTERISTICS (V = 1.8V to 5.5V, T = -40°C to +85°C.) CC APARAMETER SYMBOL CONDITIONS ..
DS1337+ ,I²C Serial Real-Time ClockGENERAL DESCRIPTION BENEFITS AND
DTC124EKAT146 , NPN 100mA 50V Digital Transistors (Bias Resistor Built-in Transistors
DTC124EKA-T146 , NPN 100mA 50V Digital Transistors (Bias Resistor Built-in Transistors
DTC124EM , NPN 100mA 50V Digital Transistors (Bias Resistor Built-in Transistors)
DTC124ES , DTA/DTC SERIES
DTC124-ES , DTA/DTC SERIES
DTC124ESA , Digital transistors (built-in resistors)


DS1337
Serial real-time clock
GENERAL DESCRIPTION
The DS1337 serial real-time clock is a low-power
clock/calendar with two programmable time-of-day alarms and a programmable square-wave output.
Address and data are transferred serially through a 2-wire, bidirectional bus. The clock/calendar provides
seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is
automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock
operates in either the 24-hour or 12-hour format with AM/PM indicator.
APPLICATIONS

Handhelds (GPS, POS Terminal, MP3 Player) Consumer Electronics (Set-Top Box, VCR/Digital
Recording) Office Equipment (Fax/Printer, Copier)
Medical (Glucometer, Medicine Dispenser) Telecommunications (Router, Switcher, Server)
Other (Utility Meter, Vending Machine, Thermostat, Modem)
FEATURES
Real-Time Clock (RTC) Counts Seconds,
Minutes, Hours, Day, Date, Month, and Year with Leap-Year Compensation Valid Up to 2100 Two-Wire Serial Interface Two Time-of-Day Alarms Oscillator Stop Flag Programmable Square-Wave Output
Defaults to 32kHz on Power-Up
��Available in 8-Pin DIP, SO, or �SOP
ORDERING INFORMATION

PIN CONFIGURATIONS

DS1337
Serial Real-Time Clock

TYPICAL OPERATING CIRCUIT
DS1337 Serial Real-Time Clock
ABSOLUTE MAXIMUM RATINGS

Voltage Range on Any Pin Relative to Ground -0.3V to +6.0V
Operating Temperature Range -40°C to +85°C
Storage Temperature Range -55°C to +125°CSoldering Temperature Range See IPC/JEDEC J-STD-020A Specification
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is
not implied. Exposure to the absolute maximum rating conditions for extended periods may affect device.
RECOMMENDED DC OPERATING CONDITIONS

(TA = -40°C to +85°C)
DC ELECTRICAL CHARACTERISTICS

(VCC = 1.8V to 5.5V, TA = -40°C to +85°C.)
DC ELECTRICAL CHARACTERISTICS

(VCC = 1.3V to 1.8V, TA = -40°C to +85°C.)
CRYSTAL SPECIFICATIONS*

*The crystal, traces, and crystal input pins should be isolated from RF generating signals. Refer to Application Note 58: Crystal Considerations
for Dallas Real-Time Clocks for additional specifications.
DS1337 Serial Real-Time Clock
AC ELECTRICAL CHARACTERISTICS

(VCC = 1.8V to 5.5V, TA = -40°C to +85°C.) Note 1: SCL only.
Note 2: SDA, INTA, and SQW/INTB.
Note 3: ICCA—SCL clocking at max frequency = 400kHz, VIL = 0.0V, VIH = VCC.
Note 4: Specified with 2-wire bus inactive, VIL = 0.0V, VIH = VCC.
Note 5: SQW enabled.
Note 6: Specified with the SQW function disabled by setting INTCN = 1.
Note 7: Using recommended crystal on X1 and X2.
Note 8: After this period, the first clock pulse is generated.
Note 9: A device must internally provide a hold time of at least 300ns for the SDA signal (referred to the VIHMIN of the SCL signal) in order to

bridge the undefined region of the falling edge of SCL.
Note 10: The maximum tHD:DAT has only to be met if the device does not stretch the LOW period (tLOW) of the SCL signal.
Note 11: A fast-mode device can be used in a standard-mode system, but the requirement tSU:DAT � to 250ns
must then be met. This is
automatically be the case if the device does not stretch the LOW period of the SCL signal. If such a device does stretch the LOW
period of the SCL signal, it must output the next data bit to the SDA line tR max + tSU:DAT = 1000 + 250 = 1250ns before the SCL line is
released.
Note 12: CB—total capacitance of one bus line in pF.
DS1337 Serial Real-Time ClockTYPICAL OPERATING CHARACTERISTICS
ICCA vs. VCC
(SQUARE-WAVE ON)

DS1337 toc04
VCC (V)
SUPPLY CURRENT (
DS1337 toc02
IOSC VS. VCC
(SQUARE-WAVE ON)
VCC (V)
SUPPLY CURRENT (nA)
IOSC VS. VCC
(SQUARE-WAVE OFF)
DS1337 toc01
VCC (V)
SUPPLY CURRENT (nA)
1.3
DS1337 Serial Real-Time Clock
PIN DESCRIPTION

DS1337 Serial Real-Time Clock
Figure 2. Timing Diagram

OPERATION

The block diagram in Figure 3 shows the main elements of the DS1337. As shown, communications to and from
the DS1337 occur serially over a 2-wire, bidirectional bus. The DS1337 operates as a slave device on the serial bus. Access is obtained by implementing a START condition and providing a device identification code, followed
by data. Subsequent registers can be accessed sequentially until a STOP condition is executed.
Figure 3. Block Diagram
DS1337 Serial Real-Time Clock
CLOCK ACCURACY

The accuracy of the clock is dependent upon the accuracy of the crystal and the accuracy of the match between
the capacitive load of the oscillator circuit and the capacitive load for which the crystal was trimmed. Crystal
frequency drift caused by temperature shifts creates additional error. External circuit noise coupled into the oscillator circuit can result in the clock running fast. Refer to Application Note 58: Crystal Considerations with Dallas Real-Time Clocks for detailed information. ADDRESS MAP
The address map for the registers of the DS1337 is shown in Table 1. During a multibyte access, when the
address pointer reaches the end of the register space (0Fh) it wraps around to location 00h. On a 2-wire START, STOP, or address pointer incrementing to location 00h, the current time is transferred to a second set of registers.
The time information is read from these secondary registers, while the clock may continue to run. This eliminates the need to re-read the registers in case of an update of the main registers during a read.
Table 1. Timekeeper Registers Note: Unless otherwise specified, the state of the registers is not defined when power is first applied or VCC falls below the VOSC.
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED