IC Phoenix
 
Home ›  AA30 > ADM202JN-ADM202JRN-ADM202JRW-ADM203JN,High Speed, +5 V, 0.1 uF CMOS RS-232 Driver/Receivers
ADM202JN-ADM202JRN-ADM202JRW-ADM203JN Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
ADM202JNADN/a624avaiHigh Speed, +5 V, 0.1 uF CMOS RS-232 Driver/Receivers
ADM202JRNADN/a5900avaiHigh Speed, +5 V, 0.1 uF CMOS RS-232 Driver/Receivers
ADM202JRWADN/a684avaiHigh Speed, +5 V, 0.1 uF CMOS RS-232 Driver/Receivers
ADM203JNADN/a540avaiHigh Speed, +5 V, 0.1 uF CMOS RS-232 Driver/Receivers


ADM202JRN ,High Speed, +5 V, 0.1 uF CMOS RS-232 Driver/ReceiversSpecificationsCCT to T , unless otherwise noted)ADM202/ADM203–
ADM202JRN-REEL ,+5V, 0.1 µF CMOS RS-232 200kBPS Transceiver with 2 Drivers & 2 ReceiversAPPLICATIONSOUTPUTSINPUTS*T2 T2T2Computers IN OUTPeripheralsR1 R1R1Modems OUT INTTL/CMOS RS-232Prin ..
ADM202JRN-REEL7 ,+5V, 0.1 µF CMOS RS-232 200kBPS Transceiver with 2 Drivers & 2 Receiversspecifications. Fast driver slew rates permit operation up toOUTPUTS INPUTS**120 kB while high-driv ..
ADM202JRNZ ,+5V, 0.1 µF CMOS RS-232 200kBPS Transceiver with 2 Drivers & 2 ReceiversSPECIFICATIONS T to T , unless otherwise noted)MIN MAXParameter Min Typ Max Unit Conditions/Comment ..
ADM202JRW ,High Speed, +5 V, 0.1 uF CMOS RS-232 Driver/Receiversspecifications. Fast driver slew rates permit operation up toDO NOT MAKE8 C1+11CONNECTIONS TO C2+12 ..
ADM202JRWZ , High-Speed, 5 V, 0.1 F CMOS RS-232 Driver/Receivers
AHC138 , 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS
AHC373 , OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
AHC573 , OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
AHC573 , OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
AHC74 , DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET
AHC74 , DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET


ADM202JN-ADM202JRN-ADM202JRW-ADM203JN
High Speed, +5 V, 0.1 uF CMOS RS-232 Driver/Receivers
FUNCTIONAL BLOCK DIAGRAMS
REV.0High Speed, +5 V, 0.1 mF
CMOS RS-232 Driver/Receivers
GENERAL DESCRIPTION

The ADM202/ADM203 is a two-channel RS-232 line driver/
receiver pair designed to operate from a single +5 V power sup-
ply. A highly efficient on-chip charge pump design permits
RS-232 levels to be developed using charge pump capacitors as
small as 0.1 μF. The capacitors are internal to the package on
the ADM203 so no external capacitors are required. These con-
verters generate ±10 V RS-232 output levels.
The ADM202/ADM203 meets or exceeds the EIA-232-E and
V.28 specifications. Fast driver slew rates permit operation up to
120 kB while high drive currents allows for extended cable
lengths.
An epitaxial BiCMOS construction minimizes power consump-
tion to 10 mW and also guards against latch-up. Overvoltage
protection is provided allowing the receiver inputs to withstand
continuous voltages in excess of ±30 V. In addition, all pins
contain ESD protection to levels greater than 2 kV.
The ADM202 is available in 16-lead DIP and both narrow and
wide SOIC packages. The ADM203 is available in a 20-pin DIP
package.
FEATURES
120 kB Transmission Rate
ADM202: Small (0.1 mF) Charge Pump Capacitors
ADM203: No External Capacitors Required
Single 5 V Power Supply
Meets EIA-232-E and V.28 Specifications
Two Drivers and Two Receivers
On-Board DC-DC Converters

69 V Output Swing with +5 V Supply
Low Power BiCMOS: 2.0 mA ICC

630 V Receiver Input Levels
APPLICATIONS
Computers
Peripherals
Modems
Printers
Instruments
ADM202/ADM203–SPECIFICATIONS
(VCC = +5 V 6 10%, (ADM202 C1–C4 = 0.1 mF. All Specifications
TMIN to TMAX, unless otherwise noted)

NOTESample tested to ensure compliance.
Specifications subject to change without notice.
ABSOLUTE MAXIMUM RATINGS*

(TA = +25°C unless otherwise noted)
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+6 V . . . . . . . . . . . . . . . . . . . . . . . . . . .(VCC – 0.3 V) to +14 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+0.3 V to –14 V
Input Voltages
TIN . . . . . . . . . . . . . . . . . . . . . . . . . .–0.3 V to (VCC + 0.3 V)
RIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±30 V
Output Voltages
TOUT . . . . . . . . . . . . . . . . . . .(V+, +0.3 V) to (V–, – 0.3 V)
ROUT . . . . . . . . . . . . . . . . . . . . . . . .–0.3 V to (VCC + 0.3 V)
Short Circuit Duration
TOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Continuous
Power Dissipation
N-16 DIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .470 mW
R-16N SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .600 mW
R-16W SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500 mW
N-20 DIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .890 mW
Thermal Impedance
N-16 DIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135°C/W
R-16N SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105°C/W
R-16W SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105°C/W
N-20 DIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125°C/W
Operating Temperature Range
Commercial (J Version) . . . . . . . . . . . . . . . . . .0°C to +70°C
Storage Temperature Range . . . . . . . . . . . . .–65°C to +150°C
Lead Temperature Soldering
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . .+215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . .+220°C
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>2000 V
*This is a stress rating only and functional operation of the device at these or any
other conditions above those indicated in the operation sections of this specifica-
tion is not implied. Exposure to absolute maximum rating conditions for extended
periods of time may affect reliability.
ORDERING GUIDE
PIN CONFIGURATIONS
DIP/SOIC
T1IN
R1IN
T1OUT
R1OUT
VCC
GND
T2IN
R2IN
T2OUT
R2OUT
C1+
C1–
C2–
C2+
DIP
R1IN
T2IN
R2IN
T1OUT
T2OUTR1OUT
VCC
C1+
C2–C2+
C1–
GND
GNDC2+
C2–
R2OUT
T1IN

Figure 1.Typical Operating Circuits
PIN FUNCTION DESCRIPTION
ADM202/ADM203
GENERAL INFORMATION

The ADM202/ADM203 is an RS-232 drivers/receivers designed
to solve interface problems by meeting the EIA-232E specifica-
tions while using a single digital +5 V supply. The EIA standard
requires transmitters that will deliver ±5 V minimum on the
transmission channel and receivers that can accept signal levels
down to ±3 V. The parts achieve this by integrating step up
voltage converters and level shifting transmitters and receivers
onto the same chip. CMOS technology is used to keep the
power dissipation to an absolute minimum.
The ADM203 uses internal capacitors and, therefore, no exter-
nal capacitors are required.
The ADM202 contains an internal voltage doubler and a voltage
inverter which generates ±10 V from the +5 V input. External
0.1 μF capacitors are required for the internal voltage converter.
The ADM202/ADM203 is a modification, enhancement and
improvement to the AD230–AD241 family and derivatives
thereof. It is essentially plug-in compatible and does not have
materially different applications.
CIRCUIT DESCRIPTION

The internal circuitry consists of three main sections. These are
(a) A Charge Pump Voltage Converter
(b) RS-232 to TTL/CMOS Receivers
(c) TTL/CMOS to RS-232 Transmitters
Charge Pump DC-DC Voltage Converter

The charge pump voltage converter consists of an oscillator and
a switching matrix. The converter generates a ±10 V supply
from the input 5 V level. This is done in two stages using a
switched capacitor technique as illustrated below. First, the 5 V
input supply is doubled to 10 V using capacitor C1 as the
charge storage element. The 10 V level is then inverted to gen-
erate –10 V using C2 as the storage element.
Capacitors C3 and C4 are used to reduce the output ripple.
Their values are not critical and can be reduced if higher levels
of ripple are acceptable. The charge pump capacitors C1 and
C2 may also be reduced at the expense of higher output imped-
ance on the V+ and V– supplies. On the ADM203, all capaci-
tors C1 to C4 are molded into the package.
The V+ and V– supplies may also be used to power external
circuitry if the current requirements are small.S3
V+ = 2VCC
VCC
GNDVCCS3
V– = – (V+)
GNDV+
GND
FROM
VOLTAGE
DOUBLER

Figure 3.Charge Pump Voltage Inverter
Transmitter (Driver) Section

The drivers convert TTL/CMOS input levels into EIA-232-E
output levels. With VCC = +5 V and driving a typical EIA-232-E
load, the output voltage swing is ±9 V. Even under worst case
conditions the drivers are guaranteed to meet the ±5 V
EIA-232-E minimum requirement.
The input threshold levels are both TTL and CMOS compat-
ible with the switching threshold set at VCC/4. With a nominal
VCC = 5 V the switching threshold is 1.25 V typical. Unused
inputs may be left unconnected, as an internal 400 kΩ pull-up
resistor pulls them high forcing the outputs into a low state.
As required by the EIA-232-E standard the slew rate is limited
to less than 30 V/μs without the need for an external slew limiting
capacitor and the output impedance in the power-off state is
greater than 300 Ω.
Receiver Section

The receivers are inverting level shifters that accept EIA-232-E
input levels (±5 V to ±15 V) and translate them into 5 V TTL/
CMOS levels. The inputs have internal 5 kΩ pull-down resistors
to ground and are also protected against overvoltages of up to
±30 V. The guaranteed switching thresholds are 0.8 V minimum
and 2.4 V maximum which are well within the ±3 V EIA-232
requirement. The low level threshold is deliberately positive as it
ensures that an unconnected input will be interpreted as a low
level.
The receivers have Schmitt trigger input with a hysteresis level
of 0.5 V. This ensures error free reception both for noisy inputs
and for inputs with slow transition times.
2010OUT – mA| V
OUT
| –V

Figure 4.Charge Pump V+, V– vs. Current
2.5k2k1.5k1k500
CAPACITIVE LOAD – pF
SLEW RATE – V/µs

Figure 5.Transmitter Slew Rate vs. Load Capacitance
Figure 6.Transmitter Fully Loaded Slew Rate
Figure 7.Transmitter Output Voltage vs. VCC
Figure 8.
Figure 9.Transmitter Unloaded Slew Rate
ADM202/ADM203
OUTLINE DIMENSIONS

Dimensions shown in inches and (mm).
C1899–18–4/94
PRINTED IN U.S.A.
16-Pin Plastic DIP
(N-16)
0.325 (8.25)
0.300 (7.62)
0.015 (0.381)
0.008 (0.204)
0.195 (4.95)
PIN 1
0.840 (21.33)
0.745 (18.93)
(5.33)
0.200 (5.05)
0.125 (3.18)
0.022 (0.558)
0.014 (0.356)
(2.54)
BSC
SEATING
PLANE
0.060 (1.52)
0.015 (0.38)
0.070 (1.77)
0.045 (1.15)
16-Lead Narrow SOIC
(R-16N)
0.0500 (1.27)
BSC
SEATING
PLANE
0.0098 (0.25)
0.0040 (0.10)
0.0192 (0.49)
0.0138 (0.35)
0.0688 (1.75)
0.0532 (1.35)
0.2440 (6.20)
0.2284 (5.80)

× 45°
0° – 8°0.0099 (0.25)
0.0075 (0.19)
0.0500 (1.27)
0.0160 (0.41)
0.0196 (0.50)
0.0099 (0.25)
20-Pin Plastic DIP
(N-20)
0.325 (8.25)
0.300 (7.62)
0.015 (0.381)
0.008 (0.204)
0.195 (4.95)
PIN 1
0.280 (7.11)
0.240 (6.10)
(5.33)
0.200 (5.05)
0.125 (3.18)
0.022 (0.558)
0.014 (0.356)
(2.54)
BSC
0.070 (1.78)
0.045 (1.15)
SEATING
PLANE
0.060 (1.52)
0.015 (0.38)
1.060 (26.90)
0.925 (23.50)
16-Lead Wide SOIC
(R-16W)
PIN 1
0.299 (7.60)
0.291 (7.40)
0.419 (10.65)
0.404 (10.26)
0.018 (0.46)
0.014 (0.36)
0.050 (1.27)
BSC
0.107 (2.72)
0.089 (2.26)
0.010 (0.25)
0.004 (0.10)
0.015 (0.38)
0.007 (1.18)
0.045 (1.15)
0.020 (0.50)
0.364 (9.246)
0.344 (8.738)
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED