IC Phoenix
 
Home ›  AA11 > AD680,Bandgap, Low Power 2.5v Reference
AD680 Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
AD680ADN/a194avaiBandgap, Low Power 2.5v Reference


AD680 ,Bandgap, Low Power 2.5v Referenceapplications such as5. Plastic DIP packaging provides machine insertability, whilehand-held battery ..
AD680AN ,Low Power, Low Cost 2.5 V ReferenceSPECIFICATIONS (T = +258C, V = +5 V, unless otherwise noted)A IN AD680AN/AR AD680JN/JR ..
AD680AR ,Low Power, Low Cost 2.5 V ReferenceFEATURESLow Quiescent Current: 250 mA maxLaser Trimmed to High Accuracy:TP* 1 8 TP*2.5 V 65 mV max ..
AD680JN ,Low Power, Low Cost 2.5 V ReferenceLow Power, Low Costa2.5 V ReferenceAD680*CONNECTION DIAGRAMS
AD680JN. ,Low Power, Low Cost 2.5 V ReferenceSpecifications in boldface are tested on all production units at final eleetrical test. Results fro ..
AD680JR ,Low Power, Low Cost 2.5 V ReferenceSpecifications subject to change without notice.
ADC1001CCJ ,10-Bit µP Compatible A/D Converter [Life-time buy]electrical specifications do not apply when operatingthe device beyond its specified operating cond ..
ADC1001CCJ-1 ,10-Bit µP Compatible A/D Converter [Life-time buy]Featuresn ADC1001 is pin compatible with ADC0801 series 8-bitThe ADC1001 is a CMOS, 10-bit successi ..
ADC10030CIVT ,10-Bit, 30 MSPS, 125 mW A/D Converter with Internal Sample and HoldGeneral Descriptionn Guaranteed No Missing CodesThe ADC10030 is a low power, high performance CMOSn ..
ADC10030CIVTX ,10-Bit, 30 MSPS, 125 mW A/D Converter with Internal Sample and Holdapplications, and itsn Document Scannersspeed and resolution are ideal for charge coupled devicen M ..
ADC10040CIMT ,10-Bit, 40 MSPS, 3V, 55.5 mW A/D ConverterFeaturesn Single +3.0V operationTheADC10040 is a monolithic CMOS analog-to-digital con-verter capab ..
ADC10040CIMT/NOPB ,10-Bit, 40 MSPS, 3V, 55.5 mW A/D Converter 28-TSSOP -40 to 85FEATURES DESCRIPTIONThe ADC10040 is a monolithic CMOS analog-to-2• Single +3.0V Operationdigital co ..


AD680
Bandgap, Low Power 2.5v Reference
REV.D
Low Power, Low Cost
2. 5 V Reference
FEATURES
Low Quiescent Current: 250 �A Max
Laser Trimmed to High Accuracy:
2.5 V �5 mV Max (AN, AR Grade)
Trimmed Temperature Coefficient:
20 ppm/�C Max (AN, AR Grade)
Low Noise: 8 �V p-p from 0.1 Hz to 10 Hz
250 nV/√Hz Wideband
Temperature Output Pin (N, R Packages)
Available in Three Package Styles:
8-Lead Plastic DIP, 8-Lead SOIC and 3-Pin TO-92
CONNECTION DIAGRAMS
PRODUCT DESCRIPTION

The AD680 is a bandgap voltage reference that provides a fixed
2.5 V output from inputs between 4.5 V and 36 V. The archi-
tecture of the AD680 enables the reference to be operated at a
very low quiescent current while still realizing excellent dc
characteristics and noise performance. Trimming of the high
stability thin-film resistors is performed for initial accuracy and
temperature coefficient, resulting in low errors over temperature.
The precision dc characteristics of the AD680 make it ideal for
use as a reference for D/A converters which require an external
precision reference. The device is also ideal for A/D converters
and, in general, can offer better performance than the standard
on-chip references.
Based upon the low quiescent current of the AD680, which
rivals that of many incomplete two-terminal references, the
AD680 is recommended for low power applications such as
hand-held battery equipment.
A temperature output pin is provided on the 8-lead package
versions of the AD680. The temperature output pin provides an
output voltage that varies linearly with temperature and allows
the AD680 to be configured as a temperature transducer while
providing a stable 2.5 V output.
The AD680 is available in five grades. The AD680AN is specified
for operation from –40°C to +85°C, while the AD680JN is
specified for 0°C to 70°C operation. Both the AD680AN and
AD680JN are available in 8-lead plastic DIP packages. The
AD680AR is specified for operation from –40°C to +85°C,
while the AD680JR is specified for 0°C to 70°C operation. Both
are available in an 8-lead Small Outline IC (SOIC) package.
The AD680JT is specified for 0°C to 70°C operation and is
available in a 3-pin TO-92 package.
PRODUCT HIGHLIGHTS
The AD680 bandgap reference operates on a very low quiescent
current which rivals that of many two-terminal references.
This makes the complete, higher accuracy AD680 ideal for
use in power sensitive applications.Laser trimming of both initial accuracy and temperature
coefficients results in low errors over temperature without the
use of external components. The AD680AN and AD680AR
have a maximum variation of 6.25 mV between –40°C
and +85°C.The AD680 noise is low, typically 8 µV p-p from 0.1 Hz to
10 Hz. Spectral density is also low, typically 250 nV/√Hz.The temperature output pin on the 8-lead package versions
enables the AD680 to be configured as a temperature
transducer.Plastic DIP packaging provides machine insertability, while
SOIC packaging provides surface mount capability. TO-92
packaging offers a cost effective alternative to two-terminal
references, offering a complete solution in the same package
in which two-terminal references are usually found.
*. Patent Nos. 4,902,959; 4,250,445; and 4,857,862.
AD680–SPECIFICATIONS(TA = 25�C, VIN = 5 V, unless otherwise noted.)
LINE REGULATION
QUIESCENT CURRENT
OUTPUT NOISE
NOTES
1Maximum output voltage drift is guaranteed for all packages.
2The operating temperature range is defined as the temperature extremes at which the device will still function. Parts may deviate from their specified performance
outside their specified temperature range.
Specifications subject to change without notice.
Specifications in boldface are tested on all production units at final electrical test. Results from those tests are used to calculate outgoing quality levels. All min and
max specifications are guaranteed.
ABSOLUTE MAXIMUM RATINGS*
VIN to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V
Power Dissipation (25°C) . . . . . . . . . . . . . . . . . . . . . 500 mW
Storage Temperature . . . . . . . . . . . . . . . . . . –65°C to +125°C
Lead Temperature (Soldering, 10 sec) . . . . . . . . . . . . .300°C
Package Thermal Resistance
θJA (All Packages) . . . . . . . . . . . . . . . . . . . . . . . . 120°C/W
Output Protection: Output safe for indefinite short to ground
and momentary short to VIN.
*Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
8-Lead Plastic DIP
and
8-Lead SOIC Packages
TO-92 Package

Figure 1. Connection Diagrams
THEORY OF OPERATION

Bandgap references are the high-performance solution for low
supply voltage operation. A typical precision bandgap will con-
sist of a reference core and buffer amplifier. Based on a new,
patented bandgap reference design (Figure 2), the AD680
merges the amplifier and the core bandgap function to produce
a compact, complete precision reference. Central to the device
is a high gain amplifier with an intentionally large Proportional
To Absolute Temperature (PTAT) input offset. This offset is
controlled by the area ratio of the amplifier input pair, Q1 and
Q2, and is developed across resistor R1. Transistor Q12’s base
emitter voltage has a Complementary To Absolute Temperature
(CTAT) characteristic. Resistor R2 and the parallel combina-
tion of R3 and R4 “multiply” the PTAT voltage across R1.
Trimming resistors R3 and R4 to the proper ratio produces a
temperature invariant 2.5 V at the output. The result is an
accurate, stable output voltage accomplished with a minimum
number of components.
Figure 2.Schematic Diagram
An additional feature with this approach is the ability to minimize
the noise while maintaining very low overall power dissipation
for the entire circuit. Frequently it is difficult to independently
control the dominant noise sources for bandgap references:
bandgap transistor noise and resistor thermal noise. By properly
choosing the operating currents of Q1 and Q2 and separately
sizing R1, low wideband noise is realized while maintaining
1 mW typical power dissipation.
ORDERING GUIDE
AD680
APPLYING THE AD680

The AD680 is simple to use in virtually all precision reference
applications. When power is applied to +VIN and the GND pin
is tied to ground, VOUT provides a 2.5 V output. The AD680
typically requires less than 250 µA of current when operating
from a supply of 4.5 V to 36 V.
To operate the AD680, the +VIN pin must be bypassed to the
GND pin with a 0.1 µF capacitor tied as close to the AD680 as
possible. Although the ground current for the AD680 is small
(typically 195 µA), a direct connection should be made between
the AD680 GND pin and the system ground plane.
Reference outputs are frequently required to handle fast tran-
sients caused by input switching networks, as are commonly
found in ADCs and measurement instrumentation equipment.
Many of the dynamic problems associated with this situation
can be minimized with a few simple techniques. Using a series
resistor between the reference output and the load will tend to
“decouple” the reference output from the transient source. Or a
relatively large capacitor connected from the reference output to
ground can serve as a charge storage element to absorb and
deliver charge as is required by the dynamic load. A 50 nF
capacitor is recommended for the AD680 in this case; this is
large enough to store the required charge, but small enough so
as not to disrupt the stability of the reference.
The 8-lead plastic DIP and SOIC packaged versions of the
AD680 also provide a temperature output pin. The voltage on
this pin is nominally 596 mV at 25°C. This pin will provide an
output linearly proportional to temperature with a characteristic
of 2 mV/°C.
NOISE PERFORMANCE

The noise generated by the AD680 is typically less than 8 µV p-p
over the 0.1 Hz to 10 Hz band. Figure 3 shows the 0.1 Hz to
10 Hz noise of a typical AD680. The noise measurement is
made with a bandpass filter made of a 1-pole high-pass filter
with a corner frequency at 0.1 Hz and a 2-pole low-pass filter
with a corner frequency at 12.6 Hz to create a filter with a
9.922 Hz bandwidth.
Figure 3.0.1 Hz to 10 Hz Noise
Noise in a 300 kHz bandwidth is approximately 800 µV p-p.
Figure 4 shows the broadband noise of a typical AD680.
Figure 4.Broadband Noise at 300 kHz
TURN-ON TIME

Upon application of power (cold start), the time required for the
output voltage to reach its final value within a specified error
band is defined as the turn-on settling time. Two components
normally associated with this are: the time for the active circuits
to settle, and the time for the thermal gradients on the chip
to stabilize. Figure 5 shows the turn-on settling time of the
AD680 to be about 20 µs to 0.025% of its final value.
Figure 5.Turn-On Settling Time
The AD680 thermal settling characteristic benefits from its
compact design. Once initial turn-on is achieved, the output
linearly approaches its final value; the output is typically within
0.01% of its final value after 25 ms.
DYNAMIC PERFORMANCE

The output stage of the amplifier is designed to provide the
AD680 with static and dynamic load regulation superior to less
complete references.
Figure 6 displays the characteristics of the AD680 output ampli-
fier driving a 0 mA to 10 mA load. Longer settling times will
result if the reference is forced to sink any transient current.
In some applications, a varying load may be both resistive and
capacitive in nature, or the load may be connected to the
AD680 by a long capacitive cable.
Figure 6a.Transient Load Test Circuit
Figure 6b.Large-Scale Transient Response
Figure 6c.Fine Scale Settling for Transient Load
Figure 7 displays the output amplifier characteristics driving a
1000 pF, 0 mA to 10 mA load.
Figure 7a.Capacitive Load Transient Response Test
Circuit
Figure 7b.Output Response with Capacitive Load
LOAD REGULATION

Figure 8 shows the load regulation characteristics of the AD680.
Figure 8.Typical Load Regulation Characteristics
AD680
TEMPERATURE PERFORMANCE

The AD680 is designed for reference applications where tem-
perature performance is important. Extensive temperature
testing and characterization ensures that the device’s perfor-
mance is maintained over the specified temperature range.
Some confusion exists in the area of defining and specifying
reference voltage error over temperature. Historically, references
have been characterized using a maximum deviation per degree
centigrade, i.e., ppm/°C. However, because of nonlinearities in
temperature characteristics which originated in standard Zener
references (such as “S” type characteristics), most manufactur-
ers now use a maximum limit error band approach to specify
devices. This technique involves the measurement of the output
at three or more different temperatures to specify an output
voltage error band.
Figure 9.Typical AD680AN/AP Temperature Drift
Figure 9 shows a typical output voltage drift for the AD680AN/AR
and illustrates the test methodology. The box in Figure 9 is
bounded on the sides by the operating temperature extremes,
and on the top and bottom by the maximum and minimum
output voltages measured over the operating temperature range.
The maximum height of the box for the appropriate tempera-
ture range and device grade is shown in Table I. Duplication of
these results requires a combination of high accuracy and stable
temperature control in a test system. Evaluation of the AD680
will produce a curve similar to that in Figure 9, but output
readings may vary depending upon the test equipment utilized.
Table I.Maximum Output Change in mV
TEMPERATURE OUTPUT PIN

The 8-lead packaged versions of the AD680 provide a tempera-
ture output pin on Pin 3 of each device. The output of Pin 3
(TEMP) is a voltage that varies linearly with temperature. VTEMP
at 25°C is 596 mV, and the temperature coefficient is 2 mV/°C.
The temperature pin has an output resistance of 12 kΩ and is
capable of sinking or sourcing currents of up to 5 µA without
disturbing the reference output, enabling the temp pin to be
buffered by any of a number of inexpensive operational amplifi-
ers that have bias currents below this value.
Figure 10.Temp Pin Transfer Characteristic
DIFFERENTIAL TEMPERATURE TRANSDUCER

Figure 11 shows a differential temperature transducer that
can be used to measure temperature changes in the AD680’s
environment. This circuit operates from a 5 V supply. The
temperature dependent voltage from the TEMP pin of the
AD680 is amplified by a factor of 5 to provide wider full-scale
range and more current sourcing capability. An exact gain of 5
can be achieved by adjusting the trim potentiometer until the
output varies by 10 mV/°C. To minimize resistance changes
with temperature, resistors with low temperature coefficients,
such as metal film resistors, should be used.
Figure 11.Differential Temperature Transducer
LOW POWER, LOW VOLTAGE REFERENCE FOR DATA
CONVERTERS

The AD680 has a number of features that make it ideally suited
for use with A/D and D/A converters. The low supply voltage
required makes it possible to use the AD680 with today’s con-
verters that run on 5 V supplies without having to add a higher
supply voltage for the reference. The low quiescent current
AD680JN/JR
AD680JT
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED