74VCX162374MTD ,Low Voltage 16-Bit D-Type Flip-Flop with 3.6V Tolerant Inputs and Outputs and 26 Ohm Series Resistors in Outputsapplications with I/O compatibility up to 3.6V. ±12 mA @ 3.0V VCC CCThe 74VCX162374 is fabricated w ..
74VCX162374MTDX ,Low Voltage 16-Bit D-Type Flip-Flop with 3.6V Tolerant Inputs and Outputs and 26 Ohm Series Resistors in Outputsapplications. The device is byte controlled. A buffered clock
74VCX162374MTD-74VCX162374MTDX
Low Voltage 16-Bit D-Type Flip-Flop with 3.6V Tolerant Inputs and Outputs and 26 Ohm Series Resistors in Outputs
74VCX162374 Low Voltage 16-Bit D-Type Flip-Flop January 2000 Revised November 2004 74VCX162374 Low Voltage 16-Bit D-Type Flip-Flop with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in Outputs General Description Features The VCX162374 contains sixteen non-inverting D-type flip-1.4V–3.6V V supply operation CC flops with 3-STATE outputs and is intended for bus oriented 3.6V tolerant inputs and outputs applications. The device is byte controlled. A buffered clock 26Ω series resistors in outputs (CP) and output enable (OE) are common to each byte and t (CLK to O ) can be shorted together for full 16-bit operation. PD n The VCX162374 is also designed with 26Ω series resistors 3.4 ns max for 3.0V to 3.6V V CC in the outputs. This design reduces line noise in applica- Power-off high impedance inputs and outputs tions such as memory address drivers, clock drivers and Supports live insertion and withdrawal (Note 1) bus transceivers/transmitters. Static Drive (I /I ) OH OL The 74VCX162374 is designed for low voltage (1.4V to 3.6V) V applications with I/O compatibility up to 3.6V. ±12 mA @ 3.0V V CC CC The 74VCX162374 is fabricated with an advanced CMOSUses patented noise/EMI reduction circuitry technology to achieve high speed operation while maintain-Latch-up performance exceeds 300 mA ing low CMOS power dissipation. ESD performance: Human body model > 2000V Machine model > 200V Note 1: To ensure the high-impedance state during power up or power down, OE should be tied to V through a pull-up resistor; the minimum CC value of the resistor is determined by the current-sourcing capability of the driver. Ordering Code: Package Order Number Package Descriptions Number 74VCX162374MTD MTD48 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Logic Symbol Pin Descriptions Pin Names Description OE Output Enable Input (Active LOW) n CP Clock Pulse Input n I –I Inputs 0 15 O –O Outputs 0 15 © 2004 DS500235
