IC Phoenix
 
Home ›  775 > 74ACT08M-74ACT08MTR-74ACT08TTR,QUAD 2-INPUT AND GATE
74ACT08M-74ACT08MTR-74ACT08TTR Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
74ACT08MFSCN/a12avaiQUAD 2-INPUT AND GATE
74ACT08MSTN/a4000avaiQUAD 2-INPUT AND GATE
74ACT08MTRSTN/a180avaiQUAD 2-INPUT AND GATE
74ACT08TTRSTN/a10avaiQUAD 2-INPUT AND GATE


74ACT08M ,QUAD 2-INPUT AND GATEAbsolute Maximum Ratings are those values beyond which damage to the device may occur. Functional o ..
74ACT08M ,QUAD 2-INPUT AND GATE74ACT08QUAD 2-INPUT AND GATE ■ HIGH SPEED: t = 4.5ns (TYP.) at V = 5VPD CC■ LOW POWER DISSIPATION: ..
74ACT08MTC ,Quad 2-Input AND GateElectrical Characteristics for ACTV T

74ACT08M-74ACT08MTR-74ACT08TTR
QUAD 2-INPUT AND GATE
1/8April 2001 HIGH SPEED: tPD = 4.5ns (TYP.) at VCC = 5V LOW POWER DISSIPATION:CC = 2μA(MAX.) at TA =25°C COMPATIBLE WITH TTL OUTPUTS
VIH = 2V (MIN.), VIL = 0.8V (MAX.) 50Ω TRANSMISSION LINE DRIVING
CAPABILITY SYMMETRICAL OUTPUT IMPEDANCE:OH| = IOL = 24mA (MIN) BALANCED PROPAGATION DELAYS:PLH ≅ tPHL OPERATING VOLTAGE RANGE:
VCC (OPR) = 4.5V to 5.5V PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 08 IMPROVED LATCH-UP IMMUNITY
DESCRIPTION

The 74ACT08 is an advanced high-speed CMOS
QUAD 2-INPUT AND GATE fabricated with
sub-micron silicon gate and double-layer metal
wiring C2 MOS tecnology.
The internal circuit is composed of 2 stages
including buffer output, which enables high noise
immunity and stable output.
The device is designed to interface directly High
Speed CMOS systems with TTL, NMOS and
CMOS output voltage levels.
All inputs and outputs are equipped with protec-
tion circuits against static discharge, giving them
2KV ESD immunity and transient excess voltage.
74ACT08

QUAD 2-INPUT AND GATE
PIN CONNECTION AND IEC LOGIC SYMBOLS
ORDER CODES
74ACT08
2/8
INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION
TRUTH TABLE
ABSOLUTE MAXIMUM RATINGS

Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is
not implied.
RECOMMENDED OPERATING CONDITIONS

1) VIN from 0.8V to 2.0V
74ACT08
3/8
DC SPECIFICATIONS

1) Maximum test duration 2ms, one output loaded at time
2) Incident wave switching is guaranteed on trasmission lines with impedances as low as 50Ω
AC ELECTRICAL CHARACTERISTICS (CL = 50 pF, RL = 500 Ω, Input tr = tf = 3ns)

(*) Voltage range is 5.0V ± 0.5V
CAPACITIVE CHARACTERISTICS

1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without
load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC/4 (per gate)
74ACT08
4/8
TEST CIRCUIT

CL = 50pF or equivalent (includes jig and probe capacitance)
RL = R1 = 500Ω or equivalent
RT = ZOUT of pulse generator (typically 50Ω)
WAVEFORM: PROPAGATION DELAYS (f=1MHz; 50% duty cycle)


ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED