74AC86MTR ,QUAD EXCLUSIVE OR GATEAbsolute Maximum Ratings are those values beyond which damage to the device may occur. Functional o ..
74AC86PC ,Quad 2-input Exclusive-OR GateFeaturesThe AC86 contains four, 2-input exclusive-OR gates.
74AC86B-74AC86M-74AC86MTR
QUAD EXCLUSIVE OR GATE
1/9April 2001 HIGH SPEED: tPD = 4ns (TYP .) at VCC = 5V LOW POWER DISSIPATION:CC = 2μA(MAX.) at TA =25°C HIGH NOISE IMMUNITY:
VNIH = VNIL = 28 % VCC (MIN.) 50Ω TRANSMISSION LINE DRIVING
CAPABILITY SYMMETRICAL OUTPUT IMPEDANCE:OH| = IOL = 24mA (MIN) BALANCED PROPAGATION DELAYS:PLH ≅ tPHL OPERATING VOLTAGE RANGE:
VCC (OPR) = 2V to 6V PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 86 IMPROVED LATCH-UP IMMUNITY
DESCRIPTIONThe 74AC86 is an advanced high-speed CMOS
QUAD EXCLUSIVE OR GATE fabricated with
sub-micron silicon gate and double-layer metal
wiring C2 MOS tecnology.
All inputs and outputs are equipped with protec-
tion circuits against static discharge, giving them
2KV ESD immunity and transient excess voltage.
74AC86QUAD EXCLUSIVE OR GATE
PIN CONNECTION AND IEC LOGIC SYMBOLS
ORDER CODES
74AC862/9
INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION
TRUTH TABLE
ABSOLUTE MAXIMUM RATINGS Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is
not implied.
RECOMMENDED OPERATING CONDITIONS 1) VIN from 30% to 70% of VCC
74AC863/9
DC SPECIFICATIONS 1) Maximum test duration 2ms, one output loaded at time
2) Incident wave switching is guaranteed on transmission lines with impedances as low as 50Ω
AC ELECTRICAL CHARACTERISTICS (CL = 50 pF, RL = 500 Ω, Input tr = tf = 3ns) (*) Voltage range is 3.3V ± 0.3V
(**) Voltage range is 5.0V ± 0.5V
74AC864/9
CAPACITIVE CHARACTERISTICS 1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without
load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC/4 (per Gate)
TEST CIRCUIT CL = 50pF or equivalent (includes jig and probe capacitance)
RL = R1 = 500Ω or equivalent
RT = ZOUT of pulse generator (typically 50Ω)
74AC865/9
WAVEFORM: PROPAGATION DELAYS (f=1MHz; 50% duty cycle)
