PIMH9 ,R1 = 10 kOhm, R2 = 47 kOhmLIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 60134).SYMBOL PARAMETER C ..
PIMN31 ,500 mA, 50 V NPN/NPN double resistor-equipped transistor; R1 = 1 kOhm, R2 = 10 kOhmApplicationsn Digital application in automotive and industrial segmentsn Switching loads1.4 Quick r ..
PIMT1 ,PNP general purpose double transistorFEATURES PINNING• 600 mW total power dissipationPIN DESCRIPTION• Low current (max. 100 mA)1, 4 emit ..
PIMT1 ,PNP general purpose double transistorLIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 60134).SYMBOL PARAMETER C ..
PIMT1 ,PNP general purpose double transistor
PIMT1 ,PNP general purpose double transistor
PR33MF51NSZF , Non-Zero Cross type DIP 8pin Triac output SSR
PR33MF51NSZF , Non-Zero Cross type DIP 8pin Triac output SSR
PR39MF21NSZ , Zero Cross type DIP 8pin Triac output SSR
PR39MF51NSZF , Cost effective Non-Zero Cross type DIP 8pin Triac output SSR
PR39MF51NSZF , Cost effective Non-Zero Cross type DIP 8pin Triac output SSR
PR6003 ,6AMP fast recovery rectifier
PIMH9
R1 = 10 kOhm, R2 = 47 kOhm
Philips Semiconductors Product specification
NPN resistor-equipped double transistor;
R1=10kΩ , R2= 47 kΩ PIMH9
FEATURES Transistors with built-inbiasresistors (R1 typ.10 kΩ and
R2 typ. 47 kΩ) No mutual interference between the transistors Simplification of circuit design Reduces number of components and board space.
APPLICATIONS General purpose switching and amplification Inverter and interface circuits Circuit driver.
DESCRIPTIONNPN resistor-equipped double transistor in an SC-74
(SOT457) plastic package.
MARKING
PINNING
QUICK REFERENCE DATA
Philips Semiconductors Product specification
NPN resistor-equipped double transistor;
R1=10kΩ, R2= 47 kΩ PIMH9
LIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 60134).
Note Device mounted on a printed-circuit board, single-sided copper, tinplated, mounting pad for collector 1 cm2.
THERMAL CHARACTERISTICS
Note Device mounted on a printed-circuit board, single-sided copper, tinplated, mounting pad for collector 1 cm2.
Philips Semiconductors Product specification
NPN resistor-equipped double transistor;
R1=10kΩ, R2= 47 kΩ PIMH9
CHARACTERISTICSTamb =25 °C unless otherwise specified.
Philips Semiconductors Product specification
NPN resistor-equipped double transistor;
R1=10kΩ, R2= 47 kΩ PIMH9
PACKAGE OUTLINE
Plastic surface mounted package; 6 leads SOT457
Philips Semiconductors Product specification
NPN resistor-equipped double transistor;
R1=10kΩ, R2= 47 kΩ PIMH9
DATA SHEET STATUS
Notes Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL .
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given arein
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device theseorat any other conditions abovethosegivenin the
Characteristics sectionsof the specificationis not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make representationor warranty thatsuch applications willbe
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonablybe expectedto resultin personal injury. Philips
Semiconductors customers usingor selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the rightto make changes, without notice,in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
the useof anyof these products, conveysno licence ortitle
under any patent, copyright, or mask work right to these
products, and makesno representationsor warranties that
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
